Skip to content
Detailing & Wax

Polishers & correction

RUPES alternatives

RUPES made the long-throw polisher the thing enthusiasts want, and then priced it where most of them cannot follow. Five machines get you a version of that result — and not every one of them is cheaper, just different.

By Mike M.Updated
Milwaukee 2684-20 M18 FUEL 15mm Random Orbital Polisher — RUPES alternatives
Featured here: the Milwaukee 2684-20 M18 FUEL 15mm Random Orbital Polisher.

How this is funded: we earn an Amazon commission when you buy through our links, at no extra cost to you. We sell nothing and stock nothing, so a pick is never a product we are trying to move. Prices are pulled live from Amazon and were last checked November 19, 2026; where we cannot verify a price we say so rather than print an old one. Full disclosure.

Research-basedPicked from published manufacturer specifications and the consistent pattern across verified-purchase owner reports. Every product here scores 8.4 or better on our rubric.How we pick

Top pickMilwaukee

Milwaukee 2684-20 M18 FUEL 15mm Random Orbital Polisher

Milwaukee put the number that matters in the model name: 15 mm, on a 5 in pad capacity, from a POWERSTATE brushless tool Milwaukee rate for heavy correction.

Our score9.1Best for: a published 15 mm throw at a bare-tool price
$244.94M18 FUEL 15mm Polisher at Amazon

Price as of November 19, 2026. #ad

Quick picks — RUPES alternatives
#ProductBest forThrowPrice
01
Milwaukee 2684-20 M18 FUEL 15mm Random Orbital Polisher

Milwaukee 2684-20 M18 FUEL 15mm Random Orbital Polisher

A published 15 mm throw at a bare-tool price

Milwaukee15 mm$244.94At Amazon
02
Adam's Cordless 15mm Swirl Killer Polisher

Adam's Cordless 15mm Swirl Killer Polisher

The only cordless machine built for paint correction first

Adam's Polishes15 mm$574.99At Amazon
03
Adam's Polishes Swirl Killer 12mm Polisher

Adam's Polishes Swirl Killer 12mm Polisher

A middle throw between the 9mm and 15mm camps

Adam's Polishes12mm$154.99At Amazon
04
Griot's Garage G9 Random Orbital Polisher

Griot's Garage G9 Random Orbital Polisher

The default answer for a first serious machine

Griot's Garage9mm$179.99At Amazon
05
Makita XOP02Z 18V LXT 5 in / 6 in Dual Action Random Orbit Polisher

Makita XOP02Z 18V LXT 5 in / 6 in Dual Action Random Orbit Polisher

Switching between free-spin and forced rotation on one machine

Makita9.1Check price at Amazon
Tap any row for the full write-up. Prices come straight from Amazon and are never typed in by hand.

The verdict

The Milwaukee 2684-20 is the closest alternative on the specification that matters: Milwaukee publish a 15 mm throw, the same geometry class as the BigFoot, on a brushless cordless tool at a fraction of the BigFoot's price — as a bare tool, which is the catch. Adam's Cordless 15mm Swirl Killer is the 15 mm machine that comes with a battery and charger in the box. Adam's 12mm Swirl Killer is the cheapest way into long-throw territory and the budget pick here. The Makita XOP02Z is not the budget route — it is a different machine rather than a cheaper one, and the only one here that can switch to forced rotation. And Griot's G9 is the answer most people should actually take, because a 9 mm throw with the right pad corrects the same paint with far less to go wrong.

What the BigFoot is known for, and why people look for an alternative

RUPES did not invent the random orbital polisher, but they are the company that made a long throw the defining feature of a serious one. The BigFoot LHR15 runs a 15 mm orbit, which means each rotation of the pad also travels 15 mm around the spindle axis, and the practical effect is coverage: a long-throw machine works a larger patch of paint per pass and corrects a full car in meaningfully less time than a short-throw machine. The LHR15 is also the best-balanced machine in its class, which is the part that does not show up on a spec sheet and the part owners talk about most.

None of that is in dispute here, and nothing on this page is an argument that the BigFoot is a bad machine. It is an argument about money and about fit. The LHR15 costs several times what a competent short-throw machine costs, it is sold as a tool only, and a 15 mm throw is less forgiving around edges, badges and body lines than a 9 mm throw is. For someone correcting their own two cars a few times a year, that combination is hard to justify — which is exactly why "rupes alternative" is a search people run.

This site already has the two head-to-head versions of this question: Griot's G9 vs RUPES LHR15 and RUPES vs Adam's polisher. This page is the wider view — every machine in our registry that gets you some version of the BigFoot result, and what each one trades away to do it.

The criteria, in the order they decide the purchase

  1. Published throw, in millimeters. This is the number that defines the category, and it is the one makers are least consistent about publishing. Two machines here publish 15 mm. One publishes 12 mm. One publishes 9 mm. One publishes an OPM range and no throw figure at all.
  2. What is actually in the box. The BigFoot is sold tool-only, and so are most of its alternatives. A bare cordless tool means a battery and a charger on top, and on a professional platform that can cost more than the tool.
  3. Corded or cordless, and whose battery. A cordless machine on a platform you already own is cheap. A cordless machine on a proprietary pack is a closed system. A corded machine never runs out mid-panel.
  4. Balance and weight, because this is an hours-long job. Vibration and mass are what you feel on the third door, not on the first. Weight figures are published where the maker publishes them and left blank where they do not.
  5. Whether the throw suits your experience, not your ambition. A long throw rewards a steady hand and punishes a rushed one. This is the criterion that moves a 9 mm machine up the page rather than down it.

Throw is the whole conversation

Published throw across the alternatives, and the trade-off at each step
ThrowWhat it doesWhat it costs youMachines here
8-9 mmCovers less paint per pass, generates less heat, stays predictable near edgesTime — more passes to correct the same panelGriot's G9 (9 mm)
12 mmA genuine step up in coverage from 9 mmBehaves closer to a 15 mm machine than a 9 mm one near edgesAdam's Swirl Killer 12mm
15 mmThe BigFoot geometry — fastest correction per pass of anything hereLess forgiving around badges, trim and body lines; needs a steady handMilwaukee 2684-20, Adam's Cordless 15mm
Not publishedMakita publish 1,600-6,800 OPM and 0-780 RPM instead, plus selectable forced rotationYou cannot compare it on the category's defining numberMakita XOP02Z

The temptation when shopping for a BigFoot alternative is to treat 15 mm as the target and everything shorter as a compromise. That is the wrong frame for most buyers. A 15 mm machine corrects faster, and it also skips across a curved fender more readily, loads the leading edge of the pad harder, and does more damage in the second you lose attention near a badge. The people for whom the long throw is clearly correct are the people doing whole cars often enough that hours saved are real money. Dual action vs rotary polisher sets out the next step up in aggression, and the same logic applies.

The ranked RUPES alternatives

Ordered on how closely each one reproduces the BigFoot result, then on what it asks of you to do it. Prices are live from Amazon — check them, because not all of these are the saving you might assume, and a bare tool does not always have a price showing.

MilwaukeeOutstandingSpec-verified

Milwaukee 2684-20 M18 FUEL 15mm Random Orbital Polisher

Best for: A published 15 mm throw at a bare-tool price

Milwaukee 2684-20 M18 FUEL 15mm Random Orbital Polisher
Our score9.1

$244.94

$244.94At Amazon

Price as of November 19, 2026. #ad

Milwaukee put the number that matters in the model name: 15 mm, on a 5 in pad capacity, from a POWERSTATE brushless tool Milwaukee rate for heavy correction. An eight-position dial covers 2,650-5,100 RPM with a variable trigger on top of it, so a spreading speed and a correction speed are both repeatable settings rather than guesses — and at 5.16 lb bare it is lighter than the Makita by a wide margin.

Correction ability
Exceptional
Runtime
Good
Ergonomics
Strong
Build
Exceptional
Value
Good

Why we picked it

  • 15 mm published throw — correction geometry, not a sander orbit
  • POWERSTATE brushless, with an eight-position dial and a variable trigger over it
  • Shares batteries with any M18 tool already in the garage

Good to know. Bare tool: no battery, no charger, nothing but the 5 in plate

Published specifications

Throw
15 mm
Speed
2,650-5,100 RPM
Backing plate
5 in, included
Battery
M18, tool only
Weight
5.16 lb bare tool

Figures from Milwaukee Tool — 2684-20 M18 FUEL 15mm random orbital polisher specifications.

Adam's PolishesOutstandingSpec-verified

Adam's Cordless 15mm Swirl Killer Polisher

Best for: The only cordless machine built for paint correction first

Adam's Cordless 15mm Swirl Killer Polisher
Our score9.2

$574.99

$574.99At Amazon

Price as of November 19, 2026. #ad

This is the one cordless polisher on the list designed by a detailing company rather than a tool company, and it shows in the number that matters: a 15 mm throw on a 5 in plate, which is genuine correction geometry rather than a sander repurposed for paint. The low-profile battery sits close to the body so the machine still balances like a polisher.

Correction ability
Exceptional
Runtime
Adequate
Ergonomics
Strong
Build
Strong
Value
Adequate

Why we picked it

  • 15 mm throw is real correction geometry, not a sander orbit
  • Three fixed speeds means you can repeat a setting exactly
  • Battery and charger are in the box — no platform to buy into

Good to know. The most expensive machine here by a wide margin

Published specifications

Throw
15 mm
Speed
4,500 / 5,200 / 6,000 OPM
Backing plate
5 in / 120 mm
Battery
21V 4.0 Ah, included
Weight
5.65 lb with battery

Figures from Adam's Polishes — product documentation.

Adam's PolishesOutstandingSpec-verified

Adam's Polishes Swirl Killer 12mm Polisher

Best for: A middle throw between the 9mm and 15mm camps

Adam's Polishes Swirl Killer 12mm Polisher
Our score9.0

$154.99

$154.99At Amazon

Price as of November 19, 2026. #ad

12mm sits deliberately between the two established throws, and in practice it behaves much closer to a 15mm machine than a 9mm one — faster across a panel, and wanting more attention near an edge. A reasonable pick if you have used a short-throw machine and want more speed.

Correction speed
Strong
Control
Strong
Ergonomics
Strong
Build
Strong
Value
Good

Why we picked it

  • 12mm throw is a genuine step up in speed from 8 to 9mm
  • Better balanced than most machines near this price
  • Adam's support and parts availability are good

Good to know. The in-between throw suits a second machine, not a first

Published specifications

Throw
12mm
Motor
Not published
Speed settings
Variable
Backing plate
Not published
In the box
Tool

Figures from Adam's Polishes product documentation.

Griot's GarageOutstandingSpec-verified

Griot's Garage G9 Random Orbital Polisher

Best for: The default answer for a first serious machine

Griot's Garage G9 Random Orbital Polisher
Our score9.4

$179.99

$179.99At Amazon

Price as of November 19, 2026. #ad

A 9mm throw and a 1000W motor put the G9 exactly where most home detailers should be: fast enough to finish a car in an afternoon, short enough in the throw to stay predictable near badges and body lines. It is the machine we would buy if we were buying one machine.

Correction speed
Strong
Control
Exceptional
Ergonomics
Good
Build
Exceptional
Value
Strong

Why we picked it

  • 9mm throw is the best general-purpose compromise on the market
  • 1000W does not bog down under pressure on a cutting pad
  • Griot's lifetime warranty is the strongest in the category
  • Takes the same 5 in plate and 5.5 in pads as everything else

Good to know. Heavier than the G8, which shows on doors and quarters

Published specifications

Throw
9mm
Motor
1000W
Speed settings
Variable, 6 positions
Backing plate
5 in
Warranty
Lifetime, per Griot's Garage

Figures from Griot's Garage product documentation.

MakitaOutstandingSpec-verified

Makita XOP02Z 18V LXT 5 in / 6 in Dual Action Random Orbit Polisher

Best for: Switching between free-spin and forced rotation on one machine

Makita XOP02Z 18V LXT 5 in / 6 in Dual Action Random Orbit Polisher
Our score9.1

Check price

Check price at Amazon

No buyable offer at the last price check. #ad

The only machine here that lets you select forced rotation or free-spin random orbit, which in practice means one tool that behaves like a gear-driven polisher when you need cut and like a DA when you need to finish. Makita publishes 1,600-6,800 OPM and 0-780 RPM, and the brushless motor holds speed under pad load.

Correction ability
Strong
Runtime
Good
Ergonomics
Adequate
Build
Exceptional
Value
Adequate

Why we picked it

  • Selectable forced rotation or free-spin — two machines in one
  • Brushless with constant speed control under load
  • Takes both 5 in and 6 in plates

Good to know. 7.9 lb bare is heavy, and that is before a battery goes on it

Published specifications

Throw
Not published
Speed
1,600-6,800 OPM / 0-780 RPM
Backing plate
5 in and 6 in capable
Battery
18V LXT, tool only
Weight
7.9 lb bare tool

Figures from Makita — XOP02Z 18V LXT dual action polisher specifications.

The two that match the geometry

Only two machines in our registry publish the 15 mm throw that defines the BigFoot, and they solve the same problem from opposite directions.

The Milwaukee 2684-20 is a tool company's answer. POWERSTATE brushless motor, eight-position speed dial over a variable trigger, a 5 in backing plate in the box and nothing else — no battery, no charger. If there is already an M18 pack in the garage it is the cheapest route to 15 mm by a wide margin. If there is not, the real cost includes buying into a professional battery platform for one polisher, which is the most expensive way to own this machine.

The Adam's Cordless 15mm Swirl Killer is a detailing company's answer: designed around paint correction first, with the low-profile battery sitting close to the body so the machine still balances like a polisher, and with the battery and charger included. The trade is a proprietary pack, roughly 45 minutes of runtime at full speed by Adam's own figure, and the highest price of any alternative here. It is the machine for someone who wants 15 mm and no cord and no tool platform.

And the one that is not about saving money

The Makita XOP02Z belongs on this page but not for the usual reason. It is the only machine here that lets you select forced rotation or free-spin random orbit, which in practice is a gear-driven polisher and a dual action in one body — genuinely useful if you want cut and finish from one tool. Makita publish no millimeter throw figure, it is the heaviest machine here at 7.9 lb bare, and it is sold tool-only — Makita have never positioned it as the cheap way into this category, and Amazon does not always show a price for the bare tool at all. Buy it because you want the dual-mode capability, not because you want to spend less.

The honest answer for most people

If you are searching for a RUPES alternative because the BigFoot is out of budget, the most useful thing this page can tell you is that the machine you probably want is not a cheaper long-throw polisher at all.

The Griot's G9 runs a 9 mm throw on a 1000 W motor, takes the same 5 in plate and 5.5 in pads as everything else, and carries a lifetime warranty — the strongest in the category. On a home detailer's two cars, with a good pad and a modern compound, it corrects the same paint the BigFoot corrects. It takes longer. It is also far more forgiving of the mistake everyone makes in their first correction session, which is lingering in one place, and the money left over buys the pads and compounds that actually determine the result. The best dual action polishers ranks it against the rest of the field on those terms.

The Adam's Swirl Killer 12mm is the middle path and the cheapest machine on this page: a 12 mm throw that behaves closer to a 15 mm machine than a 9 mm one, which makes it a good second polisher and a confusing first one. If you have already used a short-throw machine and want the speed, it is the least expensive way to get most of it.

What to buy alongside whichever machine you pick

Every machine on this page is sold as a tool, with at most a backing plate in the box. The spend after the machine is not optional and it is where the result comes from: a pad set across cutting, polishing and finishing grades, a compound and a polish, and a light that shows you what you are doing.

  • Pads, in three grades. The best polishing pads covers the set, and how many polishing pads do you need? answers the quantity question — the answer is more than you think, because a loaded pad stops cutting.
  • A compound and a polish. The best polishing compounds is the pairing decision, and it changes the result more than the choice between 9 mm and 15 mm does.
  • A backing plate in a second diameter. A 3 in plate is what lets any of these machines finish pillars and mirrors rather than leaving them.
  • An inspection light. The best detailing inspection lights — you cannot correct defects you cannot see, and swirls hide under garage lighting.

09

Our recommendation

Buy this one

Milwaukee 2684-20 M18 FUEL 15mm Random Orbital Polisher

Milwaukee put the number that matters in the model name: 15 mm, on a 5 in pad capacity, from a POWERSTATE brushless tool Milwaukee rate for heavy correction.

$244.94M18 FUEL 15mm Polisher at Amazon

Price as of November 19, 2026. #ad

Or the runner-up

Adam's Cordless 15mm Swirl Killer Polisher

This is the one cordless polisher on the list designed by a detailing company rather than a tool company, and it shows in the number that matters: a 15 mm throw on a 5 in plate, which is genuine correction geometry rather than a sander repurposed for paint.

Questions people actually ask

What is a good alternative to a RUPES polisher?
The Milwaukee 2684-20 is the closest on specification: Milwaukee publish a 15 mm throw, the same geometry class as the BigFoot LHR15, on a brushless cordless tool for a fraction of the price — though it is a bare tool, so a battery and charger are extra. If you want 15 mm with the battery included, Adam's Cordless 15mm Swirl Killer is the one. If the goal is simply to correct your own cars well, Griot's G9 at 9 mm is the answer most home detailers should take.
Is a 15 mm throw polisher worth it over a 9 mm?
It is worth it if you are correcting whole cars often enough for hours saved to be real money. A 15 mm throw covers more paint per pass and finishes a car faster. It is also less forgiving: it skips across curved panels more readily and does more damage in the second your attention drifts near a badge or a body line. For two cars a few times a year, a 9 mm machine with good pads corrects the same paint with far less to go wrong.
What polisher is most similar to the RUPES LHR15?
By published throw, the Milwaukee 2684-20 and Adam's Cordless 15mm Swirl Killer — both publish a 15 mm orbit on a 5 in pad. Neither reproduces the LHR15's balance, which is the quality owners cite most and the one you cannot shop for on a spec sheet. Both are cordless; the BigFoot is corded, so runtime is a trade you are making either way.
Why is the RUPES BigFoot so expensive?
Three reasons, and they are real rather than marketing. RUPES made the long-throw format mainstream and holds a reputation among professional installers for it; the machine is built and balanced to be used all day, which is a different engineering target from occasional home use; and it is sold tool-only, so the sticker is for the machine alone. Whether that premium is worth it depends entirely on how many cars you correct.
Is there a cheap RUPES alternative?
The cheapest machine on this page is Adam's Swirl Killer 12mm, which is the least expensive route into long-throw territory — a 12 mm orbit that behaves closer to a 15 mm machine than a 9 mm one. It suits someone who has already used a short-throw machine and wants more speed. As a first machine the in-between throw is a confusing place to start, and Griot's G9 is the better first purchase.
Can you use RUPES pads on another polisher?
The pads, yes — RUPES pads are hook-and-loop like everything else and will mount on any plate of the right diameter. The backing plate, no: RUPES machines mount on an M8 bolt while almost every other dual action polisher takes a 5/16 in spindle accessory. If you are moving between platforms, the plate is the part that does not transfer.
Do I need a cordless polisher?
Only if the car is not near an outlet, or you genuinely dislike managing a cord over a long session. Cordless machines here run on either a professional tool platform, which is cheap if you already own batteries and expensive if you do not, or a proprietary pack with a published runtime of roughly 45 minutes at full speed — about one car. A corded machine never stops mid-panel, and for correction work that is worth more than most people expect.
What else do I need to buy with a polisher?
Every machine on this page is sold as a tool, with at most a backing plate included. Budget for pads in three grades, a compound and a polish, and an inspection light — that spend determines the result far more than the difference between a 9 mm and a 15 mm throw does. A second backing plate in 3 in is the cheapest capability upgrade of the lot.

Sources

Every published figure on this page traces to one of these. Where a manufacturer does not publish a number, the page says so rather than estimating it.

Last reviewed November 17, 2026. Think a figure here is wrong? Tell us at contact@detailingandwax.com and we will check it, fix it and date the correction — see our editorial policy.

Brands: want your product tested? For Brands.