Skip to content
Detailing & Wax

Polishers & correction

RUPES vs Adam's polisher

15mm against 12mm, at several times the price. The throw difference is small; the balance difference is not, and only one of them is worth paying for.

By Mike M.Updated
RUPES BigFoot LHR15 Mark V Random Orbital Polisher — RUPES vs Adam's polisher
Featured here: the RUPES BigFoot LHR15 Mark V Random Orbital Polisher.

How this is funded: we earn an Amazon commission when you buy through our links, at no extra cost to you. We sell nothing and stock nothing, so a pick is never a product we are trying to move. Prices are pulled live from Amazon and were last checked November 19, 2026; where we cannot verify a price we say so rather than print an old one. Full disclosure.

Research-basedPicked from published manufacturer specifications and the consistent pattern across verified-purchase owner reports. Every product here scores 8.4 or better on our rubric.How we pick

Top pickRUPES

RUPES BigFoot LHR15 Mark V Random Orbital Polisher

A 15mm throw machine from the company that popularized long-throw polishing.

Our score9.2Best for: correcting whole cars quickly, if the budget is not the constraint
$552.00BigFoot LHR15 Mark V at Amazon

Price as of November 19, 2026. #ad

The verdict

Adam's 12mm Swirl Killer is the right buy for almost every home detailer, because 12 mm already gets most of the long-throw speed advantage at a fraction of the cost. The RUPES BigFoot LHR15 earns its price on balance rather than on throw — it is the best-balanced machine in the category by a clear margin — and that only pays back if you are correcting several cars a year rather than one.

The throw gap is smaller than the price gap

This is the whole page in one sentence. Going from 12 mm to 15 mm is a 25 percent increase in throw, and the RUPES costs several times what the Swirl Killer does. Those two numbers do not line up, and no amount of enthusiasm about long-throw polishing makes them line up.

The useful comparison is not RUPES against Adam's on throw. It is RUPES against everything else on how the machine feels after an hour, which is a real and underrated property that does not appear on a spec sheet at all.

Neither maker publishes a wattage figure we could verify. Those cells are blank, not estimated.
RUPES BigFoot LHR15 Mark VAdam's Swirl Killer 12mm
Published throw15 mm12 mm
Published motorNot publishedNot published
Published backing plateNot publishedNot published
Speed controlVariableVariable
In the boxTool only — no pads or liquidsTool
BalanceBest in categoryBetter than most near its price
Forgiveness near an edgeLowest of the three machines hereLow — behaves like a long-throw machine

The long-throw machines, and the one that outsells both

The LHR15 and the Swirl Killer, with the Griot's G9 included because it is the machine most readers of this page should actually buy. Prices are live from Amazon.

RUPESOutstandingSpec-verified

RUPES BigFoot LHR15 Mark V Random Orbital Polisher

Best for: Correcting whole cars quickly, if the budget is not the constraint

RUPES BigFoot LHR15 Mark V Random Orbital Polisher
Our score9.2

$552.00

$552.00At Amazon

Price as of November 19, 2026. #ad

A 15mm throw machine from the company that popularized long-throw polishing. It corrects a full car in meaningfully less time than a 9mm machine, and the balance is the best in the category. Sold here as a tool only.

Correction speed
Exceptional
Control
Good
Ergonomics
Exceptional
Build
Exceptional
Value
Adequate

Why we picked it

  • 15mm throw genuinely halves the time on large flat panels
  • Best-balanced machine in this roundup by a clear margin
  • The long-throw design RUPES is known for, from the originator

Good to know. Several times the price of machines that do 80% of the job

Published specifications

Throw
15mm
Motor
Not published
Speed settings
Variable
In the box
Tool only — no pads or liquids
Backing plate
Not published

Figures from RUPES BigFoot technical data.

Adam's PolishesOutstandingSpec-verified

Adam's Polishes Swirl Killer 12mm Polisher

Best for: A middle throw between the 9mm and 15mm camps

Adam's Polishes Swirl Killer 12mm Polisher
Our score9.0

$154.99

$154.99At Amazon

Price as of November 19, 2026. #ad

12mm sits deliberately between the two established throws, and in practice it behaves much closer to a 15mm machine than a 9mm one — faster across a panel, and wanting more attention near an edge. A reasonable pick if you have used a short-throw machine and want more speed.

Correction speed
Strong
Control
Strong
Ergonomics
Strong
Build
Strong
Value
Good

Why we picked it

  • 12mm throw is a genuine step up in speed from 8 to 9mm
  • Better balanced than most machines near this price
  • Adam's support and parts availability are good

Good to know. The in-between throw suits a second machine, not a first

Published specifications

Throw
12mm
Motor
Not published
Speed settings
Variable
Backing plate
Not published
In the box
Tool

Figures from Adam's Polishes product documentation.

Griot's GarageOutstandingSpec-verified

Griot's Garage G9 Random Orbital Polisher

Best for: The default answer for a first serious machine

Griot's Garage G9 Random Orbital Polisher
Our score9.4

$179.99

$179.99At Amazon

Price as of November 19, 2026. #ad

A 9mm throw and a 1000W motor put the G9 exactly where most home detailers should be: fast enough to finish a car in an afternoon, short enough in the throw to stay predictable near badges and body lines. It is the machine we would buy if we were buying one machine.

Correction speed
Strong
Control
Exceptional
Ergonomics
Good
Build
Exceptional
Value
Strong

Why we picked it

  • 9mm throw is the best general-purpose compromise on the market
  • 1000W does not bog down under pressure on a cutting pad
  • Griot's lifetime warranty is the strongest in the category
  • Takes the same 5 in plate and 5.5 in pads as everything else

Good to know. Heavier than the G8, which shows on doors and quarters

Published specifications

Throw
9mm
Motor
1000W
Speed settings
Variable, 6 positions
Backing plate
5 in
Warranty
Lifetime, per Griot's Garage

Figures from Griot's Garage product documentation.

What balance actually means on a polisher

A polisher is a vibrating mass you hold at arm's length, sometimes above your head. A badly balanced machine transmits that vibration into your wrists and forearms, and the effect is cumulative: the first panel is fine, the fourth is unpleasant, and by the sixth you are rushing to be finished. Rushing is how panels get missed and edges get hit.

RUPES popularized long-throw polishing and the Mark V is the result of several generations of refinement on exactly this problem. It is genuinely the most comfortable full-size machine in the category. That is what the premium buys — not correction ability, which the Swirl Killer has plenty of, but the ability to keep working carefully for three hours.

Which means the premium scales with how much you polish

  • One car, once a year. The balance advantage is nearly worthless. Buy the Swirl Killer, or the G9.
  • Your own car plus a few for friends and family. Borderline. The Swirl Killer still makes more sense than the RUPES.
  • Several cars a year, or full corrections rather than touch-ups. The RUPES starts to justify itself, and the fatigue difference becomes the reason.
  • You are paid to do this. The RUPES is not a luxury, it is a tool that keeps your hands working.

15 mm is less forgiving, and that cuts both ways

More throw carries more energy to the pad edge. On a large flat hood that is pure speed. Within an inch of a badge, a body line or the lip around a headlight it is a reduction in margin, and those are the only places where paint actually gets damaged.

Both machines on this page are in the less-forgiving category — the 12mm Swirl Killer behaves much closer to a 15mm machine than to a 9mm one, which is exactly why it makes a poor first polisher. If this is your first machine, neither of these is the right answer and the best dual action polishers explains why the 9mm class is still the default recommendation.

Where the real time saving comes from

Long-throw machines are sold on speed, and the speed is real, but it is not where most of an afternoon goes. Most of an afternoon goes into the preparation: washing without adding fresh marring, decontaminating, claying where it is needed, and masking trim. Paint correction steps has that full sequence, and none of it gets faster with a bigger throw.

The second-biggest time sink is pad management. Running one saturated pad across a whole car is slower than swapping to a clean one, and it finishes worse — how many polishing pads do I need is a more consequential purchase decision than 3 mm of throw.

And the honest comparison against the mid-range

If you want the straight question of whether long-throw is worth it against the category default, Griot's G9 vs RUPES LHR15 sets those two against each other directly. It is the more useful page for most buyers than this one, because the G9 is the machine the RUPES actually has to beat on value.

07

Our recommendation

Buy this one

RUPES BigFoot LHR15 Mark V Random Orbital Polisher

A 15mm throw machine from the company that popularized long-throw polishing.

$552.00BigFoot LHR15 Mark V at Amazon

Price as of November 19, 2026. #ad

Or the runner-up

Adam's Polishes Swirl Killer 12mm Polisher

12mm sits deliberately between the two established throws, and in practice it behaves much closer to a 15mm machine than a 9mm one — faster across a panel, and wanting more attention near an edge.

Questions people actually ask

Are RUPES polishers worth the money?
For someone correcting several cars a year, yes — not because of the extra throw but because the BigFoot is the best-balanced full-size machine in the category, and fatigue is what makes people rush and damage edges. For one car once a year, the balance advantage does not pay back and a 12mm machine gets most of the speed.
Is 15mm throw much better than 12mm?
It is about 25 percent more throw, which is a real but modest speed gain on large flat panels. It is not proportional to the price difference. A 12mm machine already behaves like a long-throw polisher, so the jump from 12mm to 15mm is far smaller than the jump from 9mm to 12mm.
Does RUPES publish a wattage figure for the LHR15?
Not one we could verify, and neither does Adam's for the Swirl Killer. Both cells are left blank on this page rather than estimated. Published throw is the figure both makers do supply, and it is the one that determines correction geometry.
Is the RUPES LHR15 good for a beginner?
No. The 15mm throw carries more energy to the pad edge, which is exactly where beginners damage paint, and the machine is tool-only so there is nothing in the box to learn with. A 9mm machine such as the Griot's G9 is the right first purchase.
Do RUPES polishers come with pads?
The listing here is tool-only — no pads and no liquids. A long-throw machine also wants pads built for the extra load, so the consumable budget on a RUPES is higher than on a short-throw machine, not lower.
Which is better, Adam's Swirl Killer or RUPES?
Adam's Swirl Killer for value, and for almost every home detailer. RUPES for comfort over long sessions, which matters once you are correcting more than one or two cars a year. On correction ability alone the gap is much smaller than the price gap suggests.

Sources

Every published figure on this page traces to one of these. Where a manufacturer does not publish a number, the page says so rather than estimating it.

Last reviewed October 17, 2026. Think a figure here is wrong? Tell us at contact@detailingandwax.com and we will check it, fix it and date the correction — see our editorial policy.

Brands: want your product tested? For Brands.